MacGates.co.uk - Build your own Gate.




Great Choice!

Before we can provide you the details of 'How to build this Gate' it is now time for you to enter some data of the Gate you want to build. As you have noticed there are 6 different measurements in the drawing above:

- L1: The distance between the Walls / Strainers
- L2: The distance between Wall / Strainer and the Gate
- L3: The distance between the two Gate Wings

- H1: The height of the Middle Section of the Gate
- H2: The height of the Gate
- H3: The distance between the Ground and the Gate

Lets start with the distance between the Walls / Strainers (L1):

Now we need to know how far away the Gate from the Wall / Strainer is (L2):

What is the distance between the two Gate Wings (L3):

We are almost there.

Next is the height of the Middle Section of the Gate (H1):

And the height of the Gate (H2):

Finally - what is the distance between the Ground and the Bottom of the Gate (H3):

Additionaly, what minimum Distance would you like to have between the Slats?

Very good - now we are done here.

To continue please click on the 'NEXT' Button to the right so you can check (confirm) the data that you have just entered..